How to properly apply our Stickers?
Here are the instructions for correctly applying our Bretons vinyl stickers:
Necessary material :
1. Clean the surface where you are going to apply the sticker. It must be clean, dry and smooth.
2. If the surface is dirty, use a little water and mild soap to clean it. Rinse well and dry with a clean, dry cloth.
3. Carefully remove the sticker from the backing paper, being careful not to tear the design.
4. Place the sticker on the surface in the desired location, positioning it as desired. Be careful not to stick it crooked or cross the limits of the installation area.
5. Apply the sticker starting from the center and gently pressing towards the edges, smoothing with a soft tool like a credit card to prevent air bubbles from forming.
6. Once the sticker is positioned and smoothed, carefully remove the transfer film by gently and slowly pulling it from one corner.
7. Check that the sticker is properly applied, without air bubbles or wrinkles.
Advice :
• Avoid applying the sticker in cold or wet weather.
• For best results, do not place the sticker on a hot surface.
• Avoid touching the sticky surface with your fingers to avoid getting it dirty.
• To remove the sticker, use a hair dryer to heat the sticker and peel it off slowly.